HP B132L, B160L, B180L manual Assigning Scsi Device IDs, Usr/sbin/ioscan -f

SCSI Connections

Assigning SCSI Device IDs

Assigning SCSI Device IDs

Before assigning a SCSI device ID to your drive, you need to check your existing SCSI device IDs. To determine which SCSI device IDs are available for your device, use the ioscan command in a terminal window:

1In a terminal window, enter the following at the prompt:

/usr/sbin/ioscan -f

After a few moments, the ioscan utility lists all of the SCSI I/O devices it could find. The list appears similar to the following:

H/W PathClass Description

===========================================================

8	bc	Pseudo Bus Converter
8/0	unknown	Processor
8/12	ext_bus	GSC Fast/Wide SCSI Interface
8/12.6	target
8/12.6.0	disk	HP	C3325W
8/12.7	target
8/12.7.0	ctl	Initiator
8/16	ba	Core I/O Adapter
8/16/0	ext_bus	Built-in Parallel Interface
8/16/1	audio	Built-in Audio
8/16/4	tty	Built-in RS-232C
8/16/5	ext_bus	Built-in SCSI
8/16/5.6	target
8/16/5.6.0	disk	Quantum VP32210
8/16/5.7	target
8/16/5.7.0	ctl	Initiator
8/16/6	lan	Built-in LAN
8/16/7	ps2	Built-in Keyboard/Mouse
8/16/10	pc	Built-in Floppy Drive
8/16/10.2	floppy	HP_PC_FDC_FLOPPY
8/20	ba	Core I/O Adapter
8/20/1	hil	Built-in HIL
8/20/2	tty	Built-in RS-232C
8/20/5	ba	EISA Bus Adapter
8/24	graphics	Graphics
62	processor	Processor
63	memory	Memory

2Determine which SCSI IDs are currently in use by looking under the H/W Path heading.

184