HP B180L, B132L, B160L manual 108

Changing Your Workstation’s Hardware Configuration

Checking the SCSI IDs

After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. The list appears similar to the following:

H/W Path	Class	Description
==============================================
	bc
8	bc	Pseudo Bus Converter
8/0	unknown	Processor
8/12	ext_bus	GSC Fast/Wide SCSI
Interface
8/12.6	target
8/12.6.0	disk	HP	C3325W
8/12.7	target
8/12.7.0	ctl	Initiator
8/16	ba	Core I/O Adapter
8/16/0	ext_bus	Built-in Parallel Interface
8/16/1	audio	Built-in Audio
8/16/4	tty	Built-in RS-232C
8/16/5	ext_bus	Built-in SCSI
8/16/5.6	target
8/16/5.6.0	disk	Quantum VP32210
8/16/5.7	target
8/16/5.7.0	ctl	Initiator
8/16/6	lan	Built-in LAN
8/16/7	ps2	Built-in Keyboard/Mouse
8/16/10	pc	Built-in Floppy Drive
8/16/10.2	floppy	HP_PC_FDC_FLOPPY
8/20	ba	Core I/O Adapter
8/20/2	tty	Built-in RS-232C
8/20/5	ba	EISA Bus Adapter
8/24	graphics	Graphics
62	processor	Processor
63	memory	Memory

4You can find out the SCSI IDs currently in use by looking under the H/W Path heading. For example, the SCSI disk above is listed at address 8/16/5.6.0 which indicates a SCSI address 6.

NOTICE:Never use SCSI address 7 for any SCSI device. Address 7 is reserved for the SCSI controller.

108