HP B180L, B132L, B160L manual External Device Drives

	SCSI Connections
	Assigning SCSI Device IDs
Table 25	Single-Ended SCSI Device IDs
			Internal Device ID	External Device ID
				(Address) Number
			(Address) Number
	SCSI Device Drives			(Only 0 through 6
			(Only 0 through 6
				Available)
			Available)
		Internal System Drives:

System SCSI Drive(s)

CD-ROM Drive (if present, uses ID No.2)

4-mm DDS Tape Drive (if present, uses ID No.1)

____________________

____________________

____________________

____________________

N/A

N/A

External Device Drives

1st __________________________

2nd __________________________

3rd __________________________

4th ___________________________

5th ___________________________

6th __________________________

7th __________________________

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

____________________

____________________

____________________

____________________

____________________

____________________

____________________

____________________

NOTICE: You can have no more than 7 single-ended SCSI devices (internal and external) con- nected to the system.

5Write in the SCSI device ID of any internal drives in Table 25.

6Write in the type of external single-ended drives currently connected to your workstation under the heading “External Device Drives” and each drive’s SCSI device ID under the heading “Device ID.”

7Add your new drive to the table if it is an external device. If it is an internal drive, continue to Step 8.

186