Extron electronic MDA 3SV DUAL instruction manual FCC Class A Notice, Specifications Availability

MDA 3 Series • User Guide

This guide describes the installation and operation of the Extron MDA 3 Series Mini Distribution Amplifiers (MDA).

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.

NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory Compliance Guide” on the Extron website.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Introduction

The Extron MDA 3 Series are a family of eight one-input, three-output, video and audio distribution amplifiers. The MDA series distribution amplifiers (DAs) split one composite video or S-video input and/or audio input for output to multiple destinations with no loss of signal quality. The MDA are members of the Extron line of basic distribution amplifiers, switchers, and associated video accessories.

The MDAs distribute composite video, S-video (luminance (Y) and chrominance (C)), and/or balanced or unbalanced audio on captive screw connectors, or unbalanced audio on RCA connectors, in the following combinations:

			Audio (Captive	Audio (RCA
Distribution Amplifier	S-Video	Composite Video	Screw Connectors)	Connectors)
MDA 3SV	
MDA 3SVA			
MDA 3SV Dual	2
MDA 3V		
MDA 3AV			
MDA 3V Dual		2
MDA 3A			
MDA 3A RCA				

The MDAs ship with external desktop 12 V power supplies that accept 100 to 240 VAC, 50 Hz or 60 Hz input.

1