MB3887

USAGE PRECAUTIONS

Printed circuit board ground lines should be set up with consideration for common impedance.

Take appropriate static electricity measures.

Containers for semiconductor materials should have anti-static protection or be made of conductive material.

After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.

Work platforms, tools, and instruments should be properly grounded.

Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.

Do not apply negative voltages.

The use of negative voltages below 0.3 V may create parasitic transistors on LSI lines, which can cause malfunction.

ORDERING INFORMATION

Part number

Package

Remarks

 

 

 

MB3887PFV

24-pin plastic SSOP

 

(FPT-24P-M03)

 

 

 

 

 

 

30

Page 30
Image 30
Fujitsu MB3887 manual Usage Precautions, Ordering Information, Part number Package Remarks