Toshiba 210C manual Automatic Calibration

11. AUTOMATIC CALIBRATION

This function allows the copier to automatically calibrate the colour gradation when the colour cannot be adjusted well because the shading or the hue of the image has deviated.

- Set the A3-sized paper (recommended paper) ( Page 2-5) in the cassette before starting the calibra- tion. If any other paper is used, calibration may not be performed properly.

- If the colour often deviates, call your service technician.

*If the glass is dirty or any foreign objects are stuck to the glass, the calibration may not be carried out properly. Keep the glass clean.

*Never raise the original cover or the optional reversing automatic document feeder or open the front cover while the calibration is in progress. If this does happen, the calibration cannot be finished appropriately.

*Interrupt copying is not available during the calibration.

1 Place the A3-size paper (recommended by Toshiba) in the cassette.

2 Press the PROGRAM key to enter the programme menu, and press the CALIBRATION key.

-If the key for the desired function is not shown, press the Pre key or the Next key to switch the screen.

6

3 Enter the administrator password (5 digits), then press the SET key.

-The setting and changing of the administrator password is performed by your service technician (ask him/her for de- tails).

-We recommend you to take a memo in order not to forget the administrator password.

-If you do not need the user control by the administrator password, select the USER key under automatic calibra-

tion in the USER SELECTION mode. Page 6-17

6-28USING THE SPECIAL FUNCTIONS