Toshiba 210C 3, 2, 7, 4, 6, 5

1

2

3

4

5

6

7

8

9

10

11

12

9-24 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL

3Pull out the grip of the saddle stitch holder ( ) to-

ward you and turn it ( ) 90o clockwise in the direc-

tion of the arrow.

4Remove the empty staple case and set a new one.

- Replace both staple cases with new ones.

- Do not remove the seal holding the staples before the staple

case is set in the cartridge.

5Return the saddle stitch holder and the saddle

stitching unit to their respective original positions.

6Make sure that the finisher is attached to the copier

firmly and that A3, B4 or A4-R size paper is set in

the copier.

- If one of the above paper sizes is not set, test stapling cannot

be performed.

If test stapling fails to be performed and the following mes-

sage remains displayed, repeat the above procedure from

steps 1 to 7.

Set staple cartridge

2Slide out the saddle stitch unit carefully toward the

front.

7Close the lower cover of the finisher. Test stapling

is then automatically performed on a blank sheet.

- This operation is carried out to avoid empty stitching.

6. ADDING STAPLES (OPTIONAL) (Cont.)

Contents

Main Page Page Page Page Page Page Page Page 1 2 3 1 2 5 4 3 Page Page Page 1. BEFORE MAKING COPIES Page Page Page Page Page Page 2 1 2 1 2 1-11 3. ENERGY-SAVING FUNCTIONS Off-mode (Base model) Sleep mode (When the copier is used also as a printer) Energy saving mode (When the copier is used also as a printer) Power consumption and warm-up time at energy saving mode Page 2. HO W T O MAKE COPIES 3 2-2 Initial (default) settings 1 2 5 6 2-4 2. SETTING COPY PAPER Acceptable Copy Paper Types and Sizes Page 1 2 3 5 4 6 7 1 8 9 4 3 2-9 3. SETTING ORIGINALS Acceptable Original Types and Sizes Maximum Number of Sheets that Can be Set in the Reversing Automaic Document Feeder (optional) Sizes of originals A4, A4-R, A5-R, B5, B5-R, LT, LT-R, ST-R B4, FOLIO, LG, COMP A3, LD Paper weight 64~90g/m 50 sheets 35 sheets 25 sheets 1 3 2 Page 1 1 2 3 2 1 3 4 2 1 3 2 1 3 4 Page 3. SETTING OF BASIC COPY MODES Page 3 2 3 4 3 4 Page 3 4 2 4 2 4 2 8 4 5 6 9 3 1 4 Page 4. COLOUR EDITING AND ADJUSTMENT Page Page Page Page Page Page Page 4 Page 5. USING THE EDITING FUNCTIONS 4 1 5 2 3 6 Page 4 3 4 5 7 8 6 Page Page 4 2 5 2 3 4 5 4 5 3 6 4 5 7 Page 4 3 7 4 5 6 3 4 7 5 6 Page 6. USING THE SPECIAL FUNCTIONS 3 4 2 3 5 4 3 4 5 6-5 3. BYPASS COPYING Bypass Copy Mode 1 3 1 3 4 2 1 3 1 2 1 2 3 1 2 3 1 2 3 4 5 4 Page 2 1 Page 2 3 1 2 3 4 Page 3 2 1 2 1 3 4 5 7 6 4 5 1 2 3 1 7 5 6 4 Page 2 1 2 7. SELECTING FINISHING MODES Page 7-3 2. SORT/GROUP COPYING 4 right (shaded). Select other copy modes as required. 1 4 2 3 4 5 4 8. NETWORK SCANNING FUNCTION 1 5 4 2 3 6 7 8 9 Page Page Page 1 2 1 2 3 4 9. WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH PANEL Page 1 2 3 1 2 3 1 6 2 5 4 3 1 2 3 4 5 2 1 3 2 4 Page 1 2 5 6 3 4 7 8 9 1 2 3 4 5 6 7 1 2 3 1 2 3 3 4 1 2 5 6 1 2 3 4 5 7 6 8 9 1 3 2 7 4 6 1 2 4 3 1 2 3 4 5 1 2 3 4 Page Page Page 10. MAINTENANCE Page Page Page 10 -5 Copies are stained Copy density is too low Copy density is too high 10 -6 Copy images are blurred Images are partially missing Functions cannot be set 11. SPECIFICATIONS & OPTIONS Page Page -4 1. e-STUDIO210c/310c SPECIFICATIONS (Cont.) Page Page Page -8 2. SPECIFICATION OF OPTIONS (Cont.) Page Page -11 4. COPYING FUNCTION COMBINATION MATRIX Page -13 6. INDEX Numbers A B C -14 6. INDEX (Cont.) D E F -15 N O P R -16 6. INDEX (Cont.) T U V PERIODIC MAINTENANCE