3. BYPASS COPYING (Cont.)

Bypass Copying on Non-standard Size Paper

The size of non-standard paper is within the following ranges: Length: 100 ~ 305mm Width: 148 ~ 457mm Page 6-5 (table)

1 Perform steps 1 to 3 on page 6-7.

2 Press the NON-STANDARD key.

3 Key in each dimension (length and width) with the digital keys, or recall the data stored in the MEMORY.

6

Then press the lower SET key.

- When using the digital keys to key in the size:

 

 

Key in the length with the digital keys and press the upper

 

SET key. Simlarly, set the value for the width.

-Press the MEMORY 1 ( MEMORY 2 , MEMORY 3 or MEMORY 4 ) key and the paper size memorized in the MEMORY 1 appears.

-Storing a non-standard size in the memory Page 6-9

Select other copy modes as required.

4 Press the START key.

6-8USING THE SPECIAL FUNCTIONS

Page 100
Image 100
Toshiba 210C manual Bypass Copying on Non-standard Size Paper, Perform steps 1 to 3 on Press the NON-STANDARD key