Toshiba 210C manual Hole Punching Mode, Number of punch holes and available paper sizes

5. HOLE PUNCHING MODE

With the optional punching unit attached to the optional finisher (MJ-1019, MJ-1020), you can have your copies punched with holes.

*The paper weight should be in the range of 64 to 256 g/m2. Special paper such as OHP films or labels is excluded.

1	Place paper in the cassette(s). Page 2-4
	- When using this mode in bypass copying ( Page 6-5), be
	sure to specify the paper size.
2 Place the original(s).		Page 2-9
	Press the key on the basic screen as shown on the
3 right (shaded).

7	4	Press the HOLE PUNCH key.
		- If the key for the desired function is not shown, press the

Next key to switch the screen.

Select other copy modes as required.

5 Press the START key.

Number of punch holes and available paper sizes:

Since the number of punch holes and the distance between the holes vary depending on the country, purchase a punching unit that meets your requirements. (For details, consult your service technician.)

	Number of punch holes and hole diameter	Available paper sizes
Japan and most of	2 holes	A3, A4, A4-R, B4, B5, B5-R,
Europe (MJ-6002E)	(6.5 mm dia.)	FOLIO
North America	2/3 holes switchable	2 holes: LG, LT-R
(MJ-6002N)	(8.0 mm dia.)	3 holes: LD, LT
France	4 holes	A3, A4
(MJ-6002F)	(6.5 mm dia.; 80 mm pitch)
Sweden	4 holes	A3, A4, A4-R, B4, B5, B5-R,
(MJ-6002S)	(6.5 mm dia; 70, 21 mm pitch)	FOLIO

7-8SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS)