1. GENERAL COPYING PROCEDURES

After setting (confirming) paper in the cassettes, place the originals. When the START key is pressed with any settings unchanged, copies are made in the initial (default) settings (*1). You can make copies as desired by setting different copy modes.

2

The initial (default) settings of the copier at the time of installa-

 

tion are as shown on the right.

 

*1

The copy modes that are automatically set when the power

 

 

is turned on, when the energy-saving mode is cleared or

 

 

when the FUNCTION CLEAR key is pressed on the

 

 

control panel are called the initial (default) settings.

 

*2

This is displayed when the reversing automatic document

 

 

feeder (optional) is installed.

 

Copying Procedure

1

Place paper in the cassette(s).

- Acceptable copy paper Page 2-4

When the desired paper is not set in any of the cassettes or the large-capacity feeder (optional):

-Setting the cassette Page 2-6

-Bypass copying Page 6-5

2

Place the originals.

- Acceptable originals Page 2-9

 

- When placing an original on the glass Page 2-10

- When using the reversing automatic document feeder (op-

tional)

Page 2-11

3 Select the copy modes ( in the illustration on the page on the right).

-Use the colour mode selection key, the touch panel and the digital keys.

-Any copy modes cannot be changed after the START key is pressed (including the case when originals are divided into multiple sets when fed).

-Selecting multiple copy modes may be restricted depending

on their combination. Page 11-11, 11-12

4 Press the START key ( in the illustration on the page on the right).

-When the reversing automatic document feeder is used and the continuous feed mode is selected ( Page 6-2), copying begins.

Initial (default) settings

Full-colour mode

 

Reproduction ratio

........... 100%

Copy quantity

1

Automatic paper selection

1-sided copies from 1-sided originals

Manual image density

Text/photo mode (original image type)

Sheet bypass

plain paper

Non-sort Non-staple mode

Continuous original feed mode (*2)

2-2HOW TO MAKE COPIES

Page 28
Image 28
Toshiba 210C manual General Copying Procedures, Place paper in the cassettes, Place the originals