Panasonic KX-TG6672 Error messages, Troubleshooting, Useful Information, Base no power, Invalid

Models: KX-TG6672

1 56
Download 56 pages 61.81 Kb
Page 41
Image 41
Error messages

Useful Information

Error messages

Display message

Base no power

or

No link. Re-connect base AC adaptor.

Busy

Call phone company for your access #

Check tel line

Error!!

Invalid

Requires subscription to Caller ID.

Use rechargeable battery.

Cause/solution

R The handset has lost communication with the base unit. Move closer to the base unit and try again.

R Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again.

R The handset’s registration may have been canceled. Re-register the handset (page 27).

R The called unit is in use.

R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move

closer and try again.

R You have not stored the voice mail access number. Store the number (page 36).

R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 8).

R Recording was too short. Try again.

R There is no handset registered to the base unit matching the handset number you entered.

R The handset is not registered to the base unit. Register the handset (page 27).

R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed.

R A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4,5.

Troubleshooting

If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again.

General use

Problem

Cause/solution

 

The handset does not turn on even

 

R Place the handset on the charger to turn on the handset.

 

after installing charged batteries.

 

 

 

 

 

 

The unit does not work.

R Make sure the batteries are installed correctly (page 8).

 

 

 

R Fully charge the batteries (page 9).

 

 

 

R Check the connections (page 8).

 

 

 

R Unplug the base unit’s AC adaptor to reset the unit.

 

 

 

Reconnect the adaptor and try again.

 

 

 

R The handset has not been registered to the base unit.

 

 

 

Register the handset (page 27).

 

 

 

 

 

 

 

For assistance, please visit http://www.panasonic.com/help

41

Page 41
Image 41
Panasonic KX-TG6672B, KX-TG6671, KXTG6672B Error messages, Troubleshooting, Useful Information, Base no power, Invalid