Programming
Special programming
Alarm
An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset.
Important:
R Set the date and time beforehand (page 12).
Handset
1MMENUN#720
2MbN: Select the desired alarm option. a
MSELECTN
Off |
| Turns alarm off. Go to step 7. | |
|
|
|
|
Once |
| An alarm sounds once at the set | |
|
| time. | |
|
|
|
|
Daily |
| An alarm sounds daily at the set | |
|
| time. Go to step 4. | |
|
|
|
|
3Enter the desired month and date. a MOKN
4 Set the desired time.
5 MAM/PMN: Select “AM” or “PM”. a MOKN
6MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different ringer
tone from the one used for outside calls.
7MSELECTN a MOFFN
R When the alarm is set, 
is displayed.
Note:
R To stop the alarm, press MOFFN or place the handset on the charger.
R When the handset is in use, the alarm will not sound until the handset is in standby mode.
Silent mode
Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each handset.
Important:
R Set the date and time beforehand (page 12).
R We recommend turning the base unit ringer off (page 14) in addition to turning the silent mode on.
R If you have set the alarm, the alarm sounds even if the silent mode is turned on.
Turning silent mode on/off
Handset
1MMENUN#238
2MbN: Select the desired setting. a MSAVEN R If you select “Off”, press MOFFN to exit.
3Enter the desired hour and minute you wish to start this feature.
4MAM/PMN: Select “AM” or “PM”. a MOKN
5Enter the desired hour and minute you wish to end this feature.
6MAM/PMN: Select “AM” or “PM”.
7MSAVEN a MOFFN
R When the silent mode is set, 
is displayed.
Changing the start and end time
Handset
1MMENUN#237
2Continue from step 3, “Turning silent mode on/ off”, page 25.
Changing the handset name
Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is “No”. If you select “Yes” without entering any handset name, “Handset 1” to “Handset 6” is displayed.
Handset
1MMENUN#104
2Enter the desired name (max. 10 characters; see the character table, page 17).
R If not required, go to step 3.
3MSAVEN
4MbN: Select the desired setting. a MSELECTN 2 times
5MOFFN
For assistance, please visit http://www.panasonic.com/help | 25 |
