Panasonic KXTG6671B, KX-TG6672B Useful features during a call, Adjusting the ringer volume, Hold

Note:

R A 3.5 second pause is inserted each time MPAUSEN is pressed. Repeat as needed to create longer pauses.

Answering calls

Using the base unit

When a call is being received, the SP-PHONE indicator flashes rapidly.

Dial the phone number.

9 a MPAUSEN

1

2

3 Proceed with the operation for your unit. Base unit: Lift the corded handset.

Handset: M N

Making/Answering Calls

Base unit / Handset

1Lift the corded handset or press MN when the unit rings.

2When you finish talking, place the corded handset on the cradle. When the speakerphone is used, press MN.

Using the handset

When a call is being received, the ringer indicator flashes rapidly.

1Lift the handset and press MN or MN when the unit rings.

R You can also answer the call by pressing any dial key from 0 to 9, *, or #. (Any key answer feature)

2When you finish talking, press MOFFN or place the handset on the charger.

Auto talk

You can answer calls simply by lifting the handset off the charger. You do not need to press MN. To turn this feature on, see page 23.

Adjusting the ringer volume

Base unit / Handset

n While the unit is ringing for an incoming call: Press MDN or MCN repeatedly to select the desired volume.

R Base unit:

To turn the ringer off, press and hold MCN until the unit beeps.

n Programming the volume beforehand:

1MMENUN#160

2MbN: Select the desired volume. a MSAVEN

3Proceed with the operation for your unit. Base unit: MnN (EXIT)

Handset: MOFFN

Temporary ringer off

Base unit / Handset

While the unit is ringing for a call, you can turn the ringer off temporarily by pressing MN.

Useful features during a call

Hold

This feature allows you to put an outside call on hold.

Base unit

1Press MHOLDN during an outside call.

R If you are using the corded handset, you can place it on the cradle.

2To release hold, lift the corded handset or press MN.

R A handset user can take the call by pressing MN.

Handset

1Press MMENUN during an outside call.

2 MbN: “Hold” a MSELECTN

3To release hold, press MN.

R The base unit user can take the call by lifting the corded handset.

R Another handset user can take the call by pressing MN.

Note for base unit and handset:

R If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound and the ringer indicator on the handset flashes rapidly. After 1 additional minute on hold, the call is disconnected.

14 For assistance, please visit http://www.panasonic.com/help