Programming
Registering a handset to the base unit
The supplied handset and base unit are
1Handset:
MMENUN#130
2Base unit:
Press and hold MLOCATORN for about 5 seconds until the registration tone sounds.
R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step.
R The next step must be completed within 90 seconds.
3Handset:
Press MOKN, then wait until a long beep sounds.
Note:
R While registering, “Base in registering” is displayed on all registered handsets.
R When you purchase an additional handset, refer to the additional handset’s installation manual for registration.
Deregistering a handset
A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system.
1MMENUN#131
R All handsets registered to the base unit are displayed.
2MbN: Select the handset you want to cancel. a MSELECTN
3MbN: “Yes” a MSELECTN
4 MOFFN
For assistance, please visit http://www.panasonic.com/help | 27 |