Panasonic KXTG6672B Making calls, Making/Answering Calls, Using the base unit, volume, users

Making/Answering Calls

		3	When you finish talking, press MOFFN or place
Making calls
				the handset on the charger.
		Using the speakerphone
Using the base unit
		1		Dial the phone number and press M		N.
1 Dial the phone number.
		2		R Speak alternately with the other party.
	R To correct a digit, press MCLEARN.				M	N
2 Lift the corded handset.				When you finish talking, press OFF .
		Note:
3 When you finish talking, place the corded
		R For best performance, use the speakerphone in
	handset on the cradle.
			a quiet environment.
Note:		R To switch back to the receiver, press
R You can also dial the phone number after lifting			M	N/M	N.
	the corded handset.
		Making a call using the redial list
		The last 5 phone numbers dialed are stored in the
Using the speakerphone
		redial list (each 48 digits max.).
1 During a conversation with the corded
		1	MREDIALN or MEN REDIAL
	handset, press M N to turn on the
				R If there is a new message in the voice mail
	speakerphone.
				or answering system, MREDIALN is not
	R You can place the corded handset on the
				displayed.
	cradle.	2
				MbN: Select the desired phone number.
	R Speak into the base unit microphone.
2	R Speak alternately with the other party.	3		M	N
	When you finish talking, press M N.
		Erasing a number in the redial list
Note:
		1		MREDIALN or MEN REDIAL
R For best performance, use the speakerphone in		2	MbN: Select the desired phone number. a
	a quiet environment.
				MERASEN
R To switch to the receiver, lift the corded handset.		3
				MbN: “Yes” a MSELECTN
Making a call using the redial list		4		MOFFN
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).		Adjusting the receiver or speaker
1	MREDIALN	volume

2MbN: Select the desired phone number.

3	Lift the corded handset.		Base unit / Handset
		Press MDN or MCN repeatedly while talking.
Erasing a number in the redial list
1	MREDIALN	Pause (for PBX/long distance service
2	MbN: Select the desired phone number. a	users)
3	MERASEN (soft key)	A pause is sometimes required when making calls
	MbN: “Yes” a MSELECTN
		using a PBX or long distance service. When
4	MnN (EXIT)	storing a calling card access number and/or PIN in
		the phonebook, a pause is also needed
Using the handset		(page 19).
		Example: If you need to dial the line access
1	Lift the handset and dial the phone number.	number “9” when making outside calls with a PBX:
	R To correct a digit, press MCLEARN.

2Press MN or MCALLN.

For assistance, please visit http://www.panasonic.com/help 13