APPENDIX 4 SYSTEM MODE EO1-33032
A4.7 Dump Mode
A4-20
A4.6 Test Print (Cont.)
A4.7 Dump Mode
Auto Print
While displaying Auto Print, press the [PAUSE] key to feed one piece of
media and print slant lines (3 dots) on 5 pieces of media.
Next, press the [PAUSE] key to print bar codes on 5 pieces of media.
Pressing the [PAUSE] key again causes the printer to print characters on
5 pieces of media.
In Dump mode, any characters sent from the host computer will be
printed. Received characters are expressed in hexadecimal values. This
allows the user to verify programming commands and debug their
program.
And for other details, please refer to your nearest TOSHIBA TEC service
representative.
NOTE:
Select “AUTO PRINT (TRAN)”
when using labels, and “AUTO
PRINT (REFL)” when using tag
p
aper.
Feed Gap Sensor
Black Mark Sensor