Toshiba R-TH10, B-492L Print Speed Setting, Sensor Type Selection, Ribbon Type Selection

APPENDIX 4 SYSTEM MODE	EO1-33032
	A4.6 Test Print

A4.6 Test Print (Cont.)	Print Speed Setting			￿¥￿V
	Select the print speed for the test print.
	35,1763(('￿¥￿V
	[RESTART]	35,1763(('￿¥￿V
	[FEED]
	After selecting the print speed, press the [PAUSE] key to go to Sensor
	Type Selection.
	Sensor Type Selection
	Select the sensor type among “TRANS” (Feed Gap Sensor), “REFLECT”
NOTE:	(Black Mark Sensor) and “NONE”.
	6(162575$16￿		121(
Select the sensor type which
matches the media being used.
Basically, the Reflective Sensor					None
(Black Mark Sensor) is for tag	[RESTART]		5()/(&7￿		Black Mark Sensor
paper, and the Transmissive	[FEED]	6(162575$16￿
Sensor (Feed Gap Sensor) is					Feed Gap Sensor
for labels.
	After selecting the sensor type, press the [PAUSE] key to go to Ribbon
	Type Selection.
	Ribbon Type Selection
NOTE:	Select the ribbon type for the test print from “NO RIBBON”, “RIBBON
	TRANS.”, and “NO TRANS.”.
Select the ribbon type which	5,%%2175$16￿		125,%%21
matches the media and ribbon
being used.
Basically, the Transmissive and	[RESTART]				No ribbon
Non Transmissive are for the					Transmissive ribbon
use with ribbon, and No Ribbon	[FEED]
is for use with Direct Thermal					Non transmissive ribbon
		5,%%21	1275$16￿
paper.

After selecting the printing mode, press the [PAUSE] key to go to Issue

Mode Selection.

A4-16