2. PRINTER SETUP EO1-33032
2.5 Connecting the Power Cord
2- 4
2.5 Connecting the Power Cord
1. Connect the DC power cable from the DC Power Supply Unit to the
printer.
2. Make sure that the printer power switch is in the OFF (O) position.
3. Connect the power cord to the Power Supply Unit as shown in the
figure below.
4. Plug the other end of the power cord into a grounded outlet as shown
in the figure below.
CAUTION!
1. Make sure that the
printer power switch is
turned to the off
position before
connecting the power
cord to prevent
possible electric shock
or damage to the
printer.
2. Use only the power
cord supplied with the
printer. Use of any
other cord may cause
electric shock or fire.
3. Connect the power
cord to a supply outlet
with a properly
grounded (earthed)
connection.
Power Cord
DC Power Cable
Power Switch
Power Cord
[QQ Type] [QP Type]