Toshiba R-TH10, B-492L owner manual A4.4 Self-Diagnostic, Test, Ribbon type selection

APPENDIX 4 SYSTEM MODE	EO1-33032
	A4.4 Self-Diagnostic Test
A4.4 Self-Diagnostic	While in a Pause condition press and hold the [RESTART] key until
Test (Cont.)	“<0>RESET”￿￿!5(6(7appears in the display.
	Then, press￿￿!',the$*[FEED]￿9[￿[key, and “<1>DIAG. Vx.x” message appears.

Ribbon type selection

Press the [PAUSE] key. The ribbon type can be selected:

“NO RIBBON” (Direct Thermal Paper), “TRANS.” (Transmissive ribbon), or “NO TRANS.” (Non transmissive ribbon).

After selecting the ribbon type, press the [PAUSE] key to confirm and go to Maintenance counter and Parameter settings print out.

NOTE:

When using a ribbon, be sure to select “TRANS” or “NO TRANS.”. When using direct thermal media, be sure to select “NO RIBBON”.

125,%%21

[RESTART]

5,%%211275$16￿

[FEED]

Direct thermal paper

Transmissive ribbon

Non transmissive ribbon

Maintenance counter/parameter settings print out

NOTE:

See Section A4.8.2 for a Maintenance Counter and Parameter Settings print sample and a detailed description for each item.

NOTES:

1.If an error occurs, an error message appears, and the printer stops printing. After clearing the error, press the [PAUSE] key to return to “<1>DIAG.”. The printer does not resume printing automatically.

2.See Section A4.8.1 for Self-Diagnostic Test Print sample and a detailed description of each item.

The printer will print out the Maintenance Counter and Parameter Settings. Press the [PAUSE] key to start.

&+(&0$,17(1.,1*$1&(￿35,17&217

The printer starts printing out the Maintenance Counter & Parameter Settings.

After printing is completed, the display returns to “<1>DIAG. Vx.x”.

Self-Diagnostic$872',$*1267,&Test and the result print out

After the Maintenance Counter and Parameter Settings print out has been completed,&+(&.,1*the display￿35,17returns to “<1>DIAG. Vx.x”. Press the [PAUSE] key twice then [FEED] key once.

The Self-Diagnostic Test is ready. Press the [PAUSE] key to start.

The printer starts the Self-Diagnostic Test, and prints out the result.

After printing is completed, the display returns to “<1>DIAG. Vx.x”.

A4- 4