APPENDIX 4 SYSTEM MODE
| While in a Pause condition press and hold the [RESTART] key until | ||
A4.6 Test Print (Cont.) | “<0>RESET”!5(6(7appears in the display. |
| |
| Then, press the [FEED] key four times, and “<4>TEST PRINT” message | ||
| appears.!7(6735,17 |
|
|
| Specifying the Print Condition for the Test Print | ||
| The print conditions for Test Printing should be specified before printing. | ||
| When “<4>TEST PRINT” appears, press the [PAUSE] key. | ||
| 35,17&21',7,21 |
| |
| Issue Count Setting |
|
|
| To enter,668(the Issue&2817Count Settingmenu, press the [PAUSE] key. | ||
| [RESTART] |
| |
| [FEED] | ,668(&2817 | |
After selecting the issue count, press the [PAUSE] key to go to Print
Speed Setting.
