3. ON LINE MODE |
3.1 Operation Panel
3. ON LINE MODE
3.1 Operation Panel
This chapter describes usage of the keys on the Operation Panel in On Line Mode.
When the printer is in On Line Mode and connected to a host computer, the normal operation of printing images on labels can be achieved.
The figure below shows the Operation Panel and key functions..
LCD Message Display
POWER LED (Green)
[RESTART] key
[FEED] key
POWER ON LINE ERROR
FEED RESTART PAUSE
ON LINE LED (Green)
ERROR LED (Red)
[PAUSE] key
NOTE:
Use the [RESTART] key to resume printing after a pause, or after clearing an error.
The LCD Message Display shows messages to indicate the printer’s current status. Up to 16 characters can be displayed on this line.
There are three LED lights on the Operation Panel.
LED | Illuminates when… | Flashes when… |
POWER | The printer is turned on. | |
ON LINE | The printer is ready to | The printer is |
| print. | communicating with |
|
| your computer. |
ERROR | Any error occurs on the | |
| printer. | |
|
|
There are three keys on the Operation Panel.
PAUSE | Used to stop printing temporarily. |
RESTART | Used to restart printing. |
FEED | Used to feed the media. |
3- 1
