Toshiba R-TH10, B-492L Feed $-867PP, A4.5 Printer Parameter X Axis Fine Adjustment Cont

APPENDIX 4 SYSTEM MODE	EO1-33032
	A4.5 Printer Parameter Fine Adjustment

A4.5 Printer Parameter X Axis Fine Adjustment

Fine Adjustment

(Cont.)	With this parameter you can fine adjust the print position on X Axis.
	When “<3>ADJUST SET” appears, press the	[PAUSE] key 4 times.
X Axis Fine Adjustment	;$'-867￿￿￿￿PP	￿P
(Example)
	[RESTART]	PP

[FEED] ;$'-867￿￿￿￿￿PP

[FEED] key: Pressing the [FEED] key once causes a –0.5mm change, down to –99.5 mm.

[RESTART] key: Pressing the [RESTART] key once causes a +0.5mm change, up to +99.5 mm.

After completing the fine adjustment, press the [PAUSE] key.

NOTES:

1.The X Axis fine adjustment is performed to fine adjust the print position in horizontal direction (left or right).

2.Adjust the X axis within the effective print range. when the value reaches the coordinate 0, the value remains unchanged even if the subsequent negative fine adjustments are made.

3.This adjustment cannot be used in the Self Test mode or Test print.

4.The fine adjustment value equals the sum of the fine adjustment values set by the PC command and this parameter. The maximum

X axis fine adjustment value is ±99.5mm. When the addition of values reaches the maximum, the value remains unchanged even if subsequent fine adjustments are made.

A4-10