A4.8.3 Magnified Views of Slant Line Pattern, Busy | Toshiba B-492L

APPENDIX 4 SYSTEM MODE	EO1-33032
	A4.8 Additional Information

A4.8.2 Maintenance Counter/Parameter Check Print Sample and Descriptions (Cont.)

	No.	Item	Contents
			TYPE1: ACK is output when
	(33)	Centronics ACK/BUSY timing setting	canceling BUSY.
	(33)	Centronics ACK/BUSY timing setting	TYPE2: ACK is output after canceling
			TYPE2: ACK is output after canceling
			BUSY.
	(34)	Web printer function	ON: Available
	(34)	Web printer function	OFF: Unavailable
			OFF: Unavailable
	(35)	KB-80 keyboard connection	ON: Connect
	(35)	KB-80 keyboard connection	OFF: Not connect
			OFF: Not connect
			30m: Warning when the remaining
	(36)	Ribbon near end detection	ribbon length is about 30 m.
	(36)	Ribbon near end detection	70m: Warning when the remaining
			70m: Warning when the remaining
			ribbon length is about 70 m.
	(37)	Printer IP address	*...*
	(38)	Gateway IP address	*...*
	(39)	Subnet mask	*...*
	(40)	True type font registration area size	0 KB to 896 KB (unit of 64 KB)
	(41)	External character registration area size	0 KB to 896 KB (units of 64 KB)
	(42)	PC saving area size	0 KB to 896 KB (units of 64 KB)
			ON: Communicable
	(43)	Socket communication setting and port number	OFF: Not communicable
			Port No.: 0 -065535

A4.8.3 Magnified Views of Slant Line Pattern

∙1-dot Slant Line (Black Area Ratio: 16.7%)

∙3-Dot Slant Line (Black Area Ratio: 16.7%)

A4-27

Image 77

Toshiba B-492L, R-TH10 owner manual A4.8.3 Magnified Views of Slant Line Pattern, Busy

Contents

492L/R-TH10 Series For QQ For QP CE Compliance for EU only Wkhsoxj Request Regarding Maintenance Precautions Table of Contents Appendix 2 Messages and LED Accessories Introduction FeaturesProduct Overview Unpacking Type DimensionsAppearance of the Printer Type Side View Front View Type InteriorOperation Panel Appearance of the Power Supply Unit Precautions Printer Setup Procedure before Operation Connecting the Cables to Your Printer Connecting the Power Cord Turning OFF the Printer Turning the PrinterTurning on the Printer Loading the Media Causing injury Paper Holder Media Guide Setting the black mark sensor position Setting the feed gap sensor position Strip mode Batch mode Loading the Media Loading the Ribbon Pcmcia Cards Inserting the Optional Pcmcia Cards Test Print Operation Panel On Line Mode To be printed Operation Print Head/Platen MaintenanceCleaning Media Guide Plate/ Pinch Roller/Sensors Pinch Roller Feed Roller Paper Guide B Locking Screw Covers and Panels Paper Holder Care/Handling of the Media and Ribbon Error Messages TroubleshootingError Messages Problems/Causes Solutions Restart key Possible Problems Causes Solutions Possible ProblemsError Messages Problems/Cause Solutions Removing Jammed Media Threshold Setting Threshold Setting Printer Operation Overview Installing the Printer Drivers System Requirements Driver InstallationSystem Interface Change to the Software License Agreement screen Cont Driver Installation Driver files copy will start Uninstalling the TEC B-492 Printer Driver Uninstalling the TEC B-492 Printer Driver Model 492L/R-TH10-QQ 492L/R-TH10-QP Appendix 1 SpecificationsA1.1 Printer A1.3 Media A1.2 OptionsA1.3.1 Media Type Option Name Type Description Source A1.3.2 Detection Area of the Transmissive Sensor A1.3.4 Effective Print Area A1.3.3 Detection Area of the Reflective Sensor A1.4 Ribbon Appendix 2 Messages and Leds Symbols in the message 53&$ „Interface Cables Appendix 3 Interface A4.1 Operation Panel Appendix 4 System Mode 2PARAMETER SET 5SENSOR ADJ RAM Clear 7IP Address A4.2 Overview A4.4 Self-Diagnostic Test A4.3 Reset Mode Maintenance counter/parameter settings print out A4.4 Self-DiagnosticTest Ribbon type selection Print head element check 2PAUSE63 Feed key 567 Strip Position Fine Adjustment Fine AdjustmentA4.5 Printer Parameter Cont $&.$-PP Back Feed Length Fine Adjustment Feed $-867PP A4.5 Printer Parameter X Axis Fine Adjustment Cont Thermal Direct Print PrintThermal Transfer Print 1Rewind$-!Motor 5%1Feed$-Motor% Ribbon Motor Voltage Fine Adjustment Feed/Rewind Motor Black Mark Sensor Threshold Manual Fine Adjustment Black Mark/Feed Gap Sensor A4.6 Test Print Print Condition SettingTest Print menu contains the following Selection Specifying the Print Condition for the Test Print Issue Count Setting Ribbon Type Selection Print Speed SettingSensor Type Selection Label Length Setting Issue Mode Selection Pause key Test Print Pattern SelectionSlant Line 1 dot Slant Line 3 dots Factory Test BarcodeNon-Printing Auto Print $87235,17 755/$1 A4.7 Dump Mode A4.8 Additional Information A4.8.1 Self-Diagnostic Test Result Sample and Descriptions Sdram 8MB EXP.I/O Print Head Resistance Rank Table Total Feed ∙ Descriptions of the Maintenance Counter XON+READY Auto Busy A4.8.3 Magnified Views of Slant Line Pattern Appendix 5 Print Samples UPC-E+2 digits UPC-E+5 digits EAN8+2 digits EAN8+5 digits CODE39 Full Ascii KIX Code MaxiCode UPC-A+2 digits UPC-A+5 digits Glossaries Pre-printed label Index Index