APPENDIX 1 SPECIFICATIONS EO1-33032
A1.4 Ribbon
A1- 5
A1.4 Ribbon Please make sure that the ribbon being used is approved by TOSHIBA TEC. The warranties do not apply to any
problem caused by using non-approved ribbons.
For information regarding TOSHIBA TEC approved ribbon, please contact a sales representative.
Type Spool type
Width 41 – 112 mm (1.6” to 4.4”)
41, 68, 84 and 112 mm (1.6”, 2.7”, 3.3”, 4.4”) are recommended.
Length 600 +10, -0 m (Max.)
Outside Diameter φ90 mm (φ3.5”) (Max.)
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC specified ribbons.
2. To avoid ribbon wrinkles use a ribbon which is the correct width for each media width used.
It is possible to use narrower ribbons than media width, however, the effective print width also narrows
Ribbon width 41 mm 68 mm 84 mm 112 mm
Proper media width 20 to 36 mm 36 to 63mm 63 to 79 mm 79 to 112mm