slot has worn out beyond the reach of the legs of the "X" (enhanced detail image) it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
5.Leather Wiper: The wiper does wear as the blade brushes against it. As the end wears, move the wiper back up against the blade, referring to section on page 5 for proper placement.
6.Work Table: The work table may be either metal or plastic, depending on the year and model you purchased. Periodically wipe down or rinse the table to remove accumulated cutting residue.
7.Large Drain Hose: Periodically remove the hose and rinse it to remove cutting residue and keep it free flowing.
Service
Questions about your saw can be answered by calling MTI Customer Service at
9
