Dell W4200ED, W4200HD owner manual Using the Self-Test Feature when Connected to a Computer

Using the Self-Test Feature when Connected to a Computer

When your computer is connected to the TV display through DVI or VGA connector you can use the self-test feature to check whether your TV display is functioning properly. If your TV display and computer are properly connected but the TV display screen remains dark, run the TV display self-test by performing the following steps:

1Turn off both your computer and the TV display.

2Unplug the video cable from the back of the computer.

3Turn on the TV display. If the TV display cannot sense a video signal and is working correctly, the floating "Self-Test Feature Check" dialog box appears on the screen (against a black background). While in self-test mode, the power light remains blue and the self-test pattern scrolls through the screen continually. This box also appears during normal system operation if the video cable becomes disconnected or damaged.

4Turn off your TV display and reconnect the video cable; then turn on both your computer and the TV display. If your TV display screen remains blank, the problem may be with your computer or graphic card.

See your computer documentation for more information.

Problems When Using the TV Display as a Monitor

ProblemPossible Solution

The picture is off-centered or too small 1 Use Auto Adjust to check the Image Settings. Press Menu to enter the OSD, select Image Settings, and then select Auto Adjust.

2 Check the optimal resolution settings. You may need to download a new video driver. For more information, go to support.dell.com.

NOTE: Some older video cards may not support the resolution settings for the TV display.

No audio	1	Ensure the green audio cable is connected to audio connector on
		the TV display and on the computer. For the location of the
		connector on the TV display, see "Using the VGA Connector" on
		page 17. See your computer documentation for the location of
		connectors on your computer.
		Do not connect the audio cable to the headphone jack.
	2	Ensure the volume on the computer is not muted.
	3	Verify that sound on your computer is working by checking the
		speakers. See your computer documentation for information on
		troubleshooting your computer.
	4	Disconnect the TV display from the computer and test to see if
		the TV display volume works.

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Troubleshooting Problems With Your TV

39