14 Setting Up Your TV
www.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\solinak\Ƈ¦±\OM update\ch2e.fm
DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY
Using the ATSC or NTSC Connector (Coaxial)
1
Turn off the TV and unplug the power cord.
2
Connect the coaxial cable to the ATSC or the NTSC connectors on the TV.
NOTE: ATSC connector is available only on W4200HD.
3
Plug in the power cord for the TV and turn on the TV.
4
Enter the OSD and select TV for NTSC or Digital TV for ATSC. See "Input Select" on
page 26 for more information.
Using the Composite Connector
1
Turn off the TV and unplug the power cord.
NOTE: If you are connecting a device that you want to be able to remove, such as a video game system
or a camcorder, use the composite connector on the right side of the TV (see "Right View" on page6).
2
Connect your device to the TV using the audio and video cable.
3
Plug in the power cords for the TV and devices and turn them on.
4
Enter the OSD and select AV5 or AV6. See "Input Select" on page26 for more information.
DZ101_eUM.book Page 14 Friday, October 8, 2004 2:25 PM