Dell W4200ED, W4200HD owner manual S-Video connector splits the video signal

Quality	Cable and connector	When to Use
Better	S-Video	The S-Video connector splits the video signal
		into two signals, black-and-white and color. If
		you are using the S-Video connector, you also
		need to connect the audio cables. To locate
		the S-Video connectors, see "Right View" on
		page 6 and "Bottom View" on page 7.

Best	Component (YPbPr)	The component connectors splits the video
		signal into three signals, two color and one
		black-and-white. If you are using the
		component connectors, you also need to
		connect the audio cables. To locate the
		component connectors, see "Bottom View" on
		page 7.
		DVI receives the image data in digital format
Excellent	DVI
		so that the TV does not need to perform an
		analog-to-digital conversion, as with the
		input types described above. Because the TV
		uses digital data to display the image, DVI
		provides the highest quality input, although
		actual results depend on the video source
		(DVD player, DVR, etc.). To locate the
		connector see "Bottom View" on page 7.
Excellent	HDMI	HDMI (High Definition Multimedia
		Interface) assures that the best video signal is
		always sent from source (HDTV signal, DVD
		player) to the TV. This is achieved by allowing
		uncompressed video and multi-channel audio
		data to be sent to the display device through
		a single cable. To locate the connector see
		"Bottom View" on page 7.

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Setting Up Your TV

13