Dell W4200HD, W4200ED owner manual OSD Messages, Remote Control Problems, Message Possible Solution

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

OSD Messages

While using your TV display, the following messages may appear.

Message	Possible Solution
Auto Adjust	No action required, the TV display is performing an auto
	adjustment.
Out of Range	Check the optimal resolution settings.
	You may need to download a new video driver. For more
	information, go to support.dell.com.
No Video Input	1 Check all cables are properly connected.
	2 Ensure the proper source is selected. See "Input Select" on page 26
	for more information.
TV Button Lock	To unlock, press Menu on your remote control, select Setup.
Self Test	Appears for computer source when there is nothing plugged in.
	Select VGA or DVI from Input Select menu and nothing is plugged
	in. Plug a computer in to the VGA or DVI connector.

Remote Control Problems

Problem Possible Solution

The TV display does not respond 1 Point the remote control directly at the lower right corner of the

when using the remote control TV display. Be sure that nothing is blocking the front of the TV display. For the location of the IR, see "Front View" on page 5.

2 Verify that the batteries are properly installed.

3 If the batteries are old, install new batteries.

NOTE: Bright lights or other infrared devices may interfere with your remote control and IR on the TV display.

38

Troubleshooting Problems With Your TV