NEC user manual Specifications for MultiSync LCD2070NX, English

Specifications for MultiSync LCD2070NX

Monitor Specifications		MultiSync LCD2070NX Monitor	Notes
LCD Module	Diagonal:	51 cm/20.1 inches	Active matrix; thin film transistor (TFT)
Viewable Image Size:		51 cm/20.1 inches	liquid crystal display (LCD); 0.255 mm dot
Native Resolution (Pixel Count):		1600 x 1200	pitch; 250 cd/m2 white luminance;
			700:1 contrast ratio, typical.
Input Signal	Video:	ANALOG 0.7 Vp-p/75 Ohms	Digital Input: DVI-D
	Sync:	Separate sync.TTL Level
		Horizontal sync. Positive/Negative
		Vertical sync. Positive/Negative
		Composite sync. Positive/Negative
		Sync on Green (Video 0.7 Vp-p and Sync. 0.3 Vp-p)*2
Display Colours		16,777,216	Depends on display card used.
Viewing Angle	Left/Right:	88°/88° (CR > 10)
	Up/Down:	88°/88° (CR > 10)
Synchronization Range	Horizontal:	31.5 kHz to 91.1 kHz	Automatically
	Vertical:	56.0 Hz to 85.0 Hz	Automatically
Resolutions Supported		720 x 400*1 : VGA-Text	Some systems may not support all modes
		640 x 480*1 at 60 Hz to 85 Hz	listed.
		800 x 600*1 at 56 Hz to 85 Hz
		832 x 624*1 at 75 Hz
		1024 x 768*1 at 60 Hz to 85 Hz
		1152 x 870*1 at 75 Hz
		1280 x 1024*1 at 60 Hz to 85 Hz
		1600 x 1200 at 60 Hz.................................. Recommended resolution is 60 Hz for
			optimal display performance.
Active Display Area	Horizontal:	408 mm/16.1 inches
	Vertical:	306 mm/12.0 inches
USB Hub	I/P:	USB Specification Revision 2.0
	Port:	Upstream 1
		Downstream 4
	Load Current:	Maximum 0.5A per port
Power Supply		AC 100-240V ~ 50/60Hz
Power Consumption		50 W USB sleeping (On mode max.)
(without optional Sound Bar)		64 W USB active (On mode max.)
Current Rating		1.25 - 0.70 A
Dimensions		442.0 mm (W) x 388.5-498.5 mm (H) x 220.0 mm (D)
		17.4 inches (W) x 15.3-19.6 inches (H) x 8.7 inches (D)
Weight		8.6 kg (19.0 lbs)
Environmental Considerations
Operating Temperature:		5°C to 35°C/41°F to 95°F
	Humidity:	30% to 80%
	Feet:	0 to 12,000 Feet
Storage Temperature:		-10°C to 60°C/14°F to 140°F
	Humidity:	10% to 85%
	Feet:	0 to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

*2 If your display is not showing a picture of the SOG and Composite Sync. Signal, please contact our hotline for further assistance.

NOTE: Technical specifications are subject to change without notice.

English

English-13