Adaptec 2200S, 2120S manual Configuring E-mail Notification

Adaptec Storage Manager-Browser Edition

3When you have completed all selections, press 4 to exit.

Table 3-3 Commands for Event Log

Event Commands Event Log Levels

1Critical

2Warning

3Informational

4Exit

Configuring E-mail Notification

After you have selected the level of events, you will be asked if you would like to configure e-mail notification. Choosing N (no) exits the notifier configuration mode.

To configure e-mail notification:

1Select Y.

2A prompt is displayed to enter the IP address or hostname of the SMTP e-mail server on the network. Type in either the hostname or IP address of the server and press Enter.

3Next you will be prompted for the port number that the e-mail server is using. Accept the default if that is correct for your mail server, or provide the appropriate value and press Enter.

4Another prompt is displayed, prompting you to enter an e-mail address that all bounced mail should be forwarded to. Type in the full SMTP e-mail address and press Enter.

5The next prompt will enable you to enter the e-mail address of the first user to be notified. Type in the full SMTP e-mail address and press Enter.

6Select the level of events you want the first user to receive. If you wish to add more users, press Y and repeat the steps above.

7When you have completed all selections, press 4.

8Press Y if you want to add additional recipients or press N to exit the configuration utility.

9Restart ARCPD and the notifier.

3-33