Adaptec 2200S, 2120S manual Turns on or off automatic failover for the controller

Using the Command Line Interface

controller set automatic_failover [/failover_enabled{=boolean}]

Turns on or off automatic failover for the controller.

Switches

/failover_enabled—Specifies whether to turn on or off automatic failover on the controller. Specify 1 to enable, 0 to disable. The default is 0.

controller set container_verify [/verify_enabled{=boolean}]

Turns the container verify task on or off.

Switches

/verify_enabled—Specifies whether to turn on or off the container verify feature. The command defaults to TRUE, which means the command turns on the container verify feature.

controller show automatic_failover

Displays the automatic failover status (enabled or disabled) for the controller.

controller show channels

Displays all of the channels on the controller with the characteristics of each channel.

controller show container_verify

Displays the status of the container verify status.

4-31