Adaptec Storage Manager-Browser Edition
Logical Devices
As described earlier, when Adaptec Storage Manager loads, the Logical Devices view is expanded and you can see the arrays present on the controller.
At the top of this view are the following buttons: Create, Modify, and Delete. Each button opens a wizard that will take you through, respectively, the steps necessary to create a new array, modify an existing array, and delete existing arrays on this controller.
Modify allows you to:
■Change an array from one RAID level to another
■Expand an array
■Change the stripe size for a
For detailed instructions on using these buttons, see the sections Creating Arrays on page
The main area of the Logical Devices view is used to display the arrays on this controller. It defaults to a condensed view of top level arrays. For information on top and
Note: The Options button allows you to display
In this condensed view, the RAID level of each device as well as whether it is protected by a hot spare, is visible.
If a global hot spare exists, all arrays that the hot spare is large enough to protect will show as protected.
In the expanded view, the icons for the arrays are arranged vertically and alongside them are the capacity, name and type of array.
Selecting an array by clicking on it will highlight the following in amber:
■All the drives or segments that form the array in the Physical Devices view.
