4-21
Using the Command Line Interface
container create new_mirror [/cache{=boolean}]
[/clear{=boolean}] [/label{=string}]
[</quick_init{=boolean}>] [/scrub{=boolean}]
[/wait{=boolean}] {free_space} [{scsi_device}...]
Creates a RAID 1 (mirror) from two available spaces.
container create raid5 [/cache{=boolean}]
[/stripe_size{=integer}] [/clear{=boolean}]
[/label{=string}] [</quick_init{=boolean}>]
[/scrub{=boolean}] [/wait{=boolean}] {free_space}
[{scsi_device}...]
Creates a RAID 5.
Parameters
{free_space}—SCSI device and its associated available
space used to create the array.
{scsi_device}...—One or more SCSI devices whose
available space to use to create the array.
Switches
/cache—Specifies whether to enable the array’s cache.
/stripe_size—Stripe size for the array (only applies to
RAID 5).
/clear—Specifies whether to clear the entire array during
initialization.
/label—Label to assign to the newly created array.
/quick_init—Specifies to use the Quick Init process,
making the array available immediately.
/scrub—Specifies whether to set up the parity by building.
/wait—Specifies whether the command prompt returns
only after the parity-protect operation completes.
UG.book Page 21 Saturday, October 26, 2002 12:08 PM