Nextel comm IR1200 Local Character Framing, Command&ICF, Local Flow Control Pcca, Command+IFC

AT Commands

Query

Range

Local Character Framing

This parameter determines the local serial port asynchronous data framing. The second parameter is needed only if you select fewer than eight data bits.

Command&ICF

Action	AT+icf <framing>, <parity>
Query	AT+icf?
Range	AT+icf?
Framing	0	= AutoDetect
	3	= 8 data bits, 1 stop bit
Parameter
	5	= 7 data bits, 1 parity bit, 1 stop bit
Values:
Parity	0	= Odd
	1	= Even
Parameter
	2	= Mark
Values:
	3	= Space

Local Flow Control (PCCA)

This extended compound parameter controls, the local flow control between the computer and the modem. The two numeric sub-parameters are DCE_by_ DTE (which controls the data format he modem) and DTE_by_DCE (which controls the data from the computer).

NOTE: To change the setting of these parameters, use the &K command.

Command+IFC

Action	AT+ifc <DCE_by_DTE>, <DTE_by_DCE>
Query	AT+ifc?
Range	AT+ifc=?
RFM-4002-5015 Rev 3		75