Modem Profiles and Settings
IMPORTANT: These settings are stored on the modem’s Random Access Memory (RAM) and are lost when the modem is turned off unless stored in the modem’s
The iR1200 modem can store up to three profile or image. By default, image 2 is loaded when the modem is powered on. We recommend that you save this setting to the first profile/image.
AT Command | Save User Default |
| Configuration |
|
|
Command Syntax | AT&W1 |
|
|
Expected Return Code(s) | OK |
|
|
GPS Default Parameters
The iR1200
The factory default port characteristics are:
•Baud rate = 4800 bps
•Data bits = 8
•Stop bits = 1
•Parity = None
Note: These settings should not be changed unless absolutely necessary.
63 |