
iR1200 Modem
If you write to an
! if the value you assigned is invalid, the modem will still return an OK message to the computer screen. The attempted changes will not affect the
.
Reading an S-Register Value
The following table describes how to read a value for an
1From the command mode, type ATSn (n= the number of the
2The value of the requested
NOTE: If you attempt to read the value of an
Supported S-Registers
The following table outlines the list of
Register # | Function |
|
|
0Automatic Answer. Determines if the modem automatically answers incoming calls.
•If the value assigned to this register is 0 (zero), the modem does not answer the call but sends an appropriate message to the computer that commands the modem to answer the call.
•If the value assigned to this register is a non- zero, the modem answers the call without waiting for the computer to issue its
88 | nextel.com |