Nextel comm IR1200 manual Dte, Local Data Rate

iR1200 Modem

DCE_by_	0	= No flow control was set by DTE.
DTE	1	= XON/XOFF; do not pass XON/XOFF characters to
Parameter
	the remote DCE.
Values:
	2	= RFR active/inactive flow control
	3	= XON/XOFF; Pass DC1/DC3 characters to the
	remote DCE in addition to acting upon local flow
	control.
DTE_by_	0	= No flow control was set by DTE.
DCE	1	= XON/XOFF flow control
Parameter
Values:	2	= CTS/RFS active/inactive flow control

Local Data Rate

This numeric extended-format parameter specifies the data rate between the DTE and the DCE.

Command	+IPR
Action	AT+ipr=<rate>
Query	AT+ipr?
Range	AT+ipr=??
Parameter	0 = Automatic detection on baud rate, data framing
Values:	300 = Transmission speed in bits per second.
	2400 = Transmission speed in bits per second.
	4800 = Transmission speed in bits per second.
	9600 = Transmission speed in bits per second.
	19200 = Transmission speed in bits per second.
76	nextel.com