Nextel comm IR1200 Command+WPNEI, DTE IP Address Prefix Length, Command+WV311, Data Encryption

AT Commands

NOTE: This parameter is applicable only when the Mobile Node Client in the DCE is activated.

Command+WPNEI

Action	AT+wpnei<”address”>
Query	AT+wpnei?
Range	AT+wpnei=?
Parameter	An IP Address consists of up to 15 characters, and is in
Values:	the format “ddd.ddd.ddd.ddd”.
	0.0.0.0. = Default value

DTE IP Address Prefix Length

The prefix-length is the number of contiguous bits in an IP address that makes up the network prefix (or network number plus subnet number) of the IP address.

NOTE: This command sets the prefix length of the Mobile Node’s IP address, as specified by +WPNEI.

Command+WV311

Action	AT+wv311<length>
Query	AT+wv311?
Range	AT+wv311=?
Parameter	2-24 = Prefix length
Values:	2 = Default value

Data Encryption

The DTE uses this command to select whether or not to encrypt the air-link interface and determines how the air-link is encrypted. Encryption is negotiated during the packet data registration.

RFM-4002-5015 Rev 3 81