Installing iDEN Packet Data Applet
24The Remove Access Service window opens. Click Add.
25The RAS Device window opens. Verify that the correct COM port is displayed in the RAS Capable Device box then click OK.
NOTE: If the Motorola iDEN plus Series modem is not displayed in the RAS Capable Device box, click the Install Modem button to install the modem again.
26The Remote Access Setup window now displays the added COM port.
27From the Remote Access Setup window, highlight the COM port/Device that was just added and click Configure. The Configure Port Usage window opens. Click on the Dial out only radio button then click OK.
28The Remote Access Setup window opens. Click Continue.
29Click Close to the Network Services Selection window.
30Click Finish on the iDEN Packet Data Applet Setup window.
31The Network Settings change/Computer Restart window opens. Click Yes.
32The Installshield Wizard window will appear once Windows has completed the restart process. Click Reinstall Packet Data Applet icon to proceed with the installation.
NOTE: Check to make sure that your modem is turned on and connected to your computer before continuing with the installation.
29 |
