iR1200 Modem
Windows NT/2000
In most cases the TCP/IP protocol was installed automatically. However, for Windows NT and 2000, TCP/IP may not have been included in the standard installation. The following steps describe how to check that TCP/IP is in fact installed, and if necessary add the TCP/IP protocol.
NOTE: This may require that you contact your IT Representative or System Administrator.
1From your desktop, select StartSettingsNetwork and Dialup ConnectionsLocal Area Connection. The Local Area Connection window opens.
2Click the Properties button on the Local Area Connection window.
3Is the Internet Protocol listed under the Components listing?
4If the Internet Protocol is not listed, click the Install button. The Select Network Component Type window opens.
5Under Network Component Type listing, highlight Protocol and click Add.
6The Select Network Protocol window opens. Under Network Protocol listing, highlight Internet Protocol and click OK.
7The installation will now begin — if prompted do NOT restart.
38 | nextel.com |
