Nextel comm IR1200 manual Modem Configuration Windows NT, Under Type of Dial-Up Server, select PPP

iR1200 Modem

procedure creates the iR1200 Modem icon in the Dial-Up Networking window.

6In the Dial-Up Networking window, right click iR1200 Modem. Click Properties.

7The iR1200 Modem Network window opens. Click the Server Types tab.

NOTE: For packet data, country code and area code (under the General Tab) should always be blank to allow s=2 to be the telephone number.

8Under Type of Dial-Up Server, select PPP.

Under Allowed Network Protocols, ensure that the box next to TCP/IP is checked. Remove the check marks from all other selection boxes.

Click the TCP/IP button.

9The TCP/IP Settings window opens. Ensure that the following are checked:

•Server assigned IP address

•Server assigned name server addresses

•Use IP header compression

•Use default gateway on remote network

All other boxes should remain unchecked. Click OK.

10Click OK to complete the set up

Modem Configuration – Windows NT

Install the Modem

1Go to Start￿ Settings￿ Control Panel and click on the Modems icon.

44 nextel.com