Nextel comm IR1200 Local Flow Control Traditional, Command&K, Display Current Parameter Value

iR1200 Modem

Action	AT&f <setting>
Query	AT&v
Range

Local Flow Control (Traditional)

This parameter selects the type of flow control used between the computer and the modem while in data transfer mode. This command is supported for backward compatibility purposes. This command sets the method of flow control for both directions of the computer-to-modem interface, while the +IFC command allows for a separate setting for each direction.

!The setting for this command may implicitly alter the settings of the +IFC command.

Command&K

Action	AT&k <setting>
Query
Range
Parameter	0	= No Flow Control (not recommended)
Values:	3	= RTS/CTS Flow Control.
	4	= XON/XOFF Flow Control.

Display Current Parameter Value

This command allows the computer to view the parameter and S-register settings for the active configuration profile.

Command&V

Action

AT&fv <setting>

74 nextel.com