Manual Modem Configuration
Manual Modem Configuration
In this chapter, you will learn how to manually add a modem, configure the modem drivers and create a
NOTE: Use these instructions only if you did not previously install the iDEN Packet Data Applet.
This chapter includes:
Modem Configuration – Windows 95/98/ME | Page 41 |
|
|
Modem Configuration – Windows NT 4.0 | Page 44 |
|
|
Modem Configuration – Windows 2000 | Page 48 |
|
|
Modem Configuration – Windows 95/98/ME
Install the Modem
1Go to Start Settings Control Panel and click on the Modems icon.
2The Modem Properties window opens. Select the General tab and click Add.
3The Install New Modem window opens. Select Other. Click Next.
4The Install New Modem/Hardware Installation window opens. Check the Don’t run the Hardware Installation Wizard box. Click Next.
NOTE: If this option is not available, proceed to the next step.
5The Install New Modem/Modem Detection window opens. Check the Don’t detect my modem; I will select
41 |
