iR1200 Modem
from a list box. Click Next.
6The Install New Modem/Modem Selection window opens. Under Manufacturer, select Standard Modem Types. Under Models, click Standard 19200 bps Modem. Click Next.
7Select the COM port that you will be using to connect to the modem (i.e., COM1, COM2, or COM3), then click Next.
NOTE: If you are not sure which COM port to use, begin with COM1. If you are unable to connect to a network using COM1, you will need to reinstall the modem after attaching the modem to a different COM port.
8The Install New Modem/Modem Installation Finish window opens. Click Finish.
9Continue with the steps to Configure the Modem Driver.
Configure the Modem Driver
1From the Modems Properties window, select Standard 19200 bps Modem. Click Properties.
2The Standard 19200 bps Modems Properties window opens. On the General tab, confirm the Maximum Speed is 19200 bps.
3Click the Connection tab and verify the following settings:
•Data Bits: 8
•Parity: None
•Stop Bits: 1
Click Advanced.
4The Advanced Connection Settings window opens. If they are not selected already, select the following:
42 | nextel.com |