Nextel comm IR1200 Opening a HyperTerminal Session, Parity None Stop Bits Flow Control Hardware

iR1200 Modem

•Parity: None

•Stop Bits: 1

•Flow Control: Hardware

9Click OK when all the parameters have been selected.

10Test to make sure that you have established communication with the modem by typing the AT command “ATi4” and pressing Enter.

11You should see a message “Nextel, iDEN OK” or “Nextel, iDEN 0”.

Opening a HyperTerminal Session

The following table describes steps to start a HyperTerminal Session:

1Windows 2000/XP/Windows 98:

Start￿Programs￿Accessories￿Communications￿Hyper Terminal.

2Windows NT:

Start￿Programs￿Accessories￿HyperTerminal￿HyperT erminal

3The HyperTerminal window will open. You are now ready to issue AT commands to the Modem.

56 nextel.com