1321 mm 406 mm | Hearth and Home Technologies EL42 Series instruction

B. Optional Components

52 in.

(1321 mm)

16 in.

(406 mm)

1/2 in. (13 mm)

HX3 Hearth Extension

66 in.

(1676 mm)

20 in.

(508 mm)

1/2 in.

(13 mm)

HX4 Hearth Extension

ID4 Insulated Duct

4 in. (102 mm) i.d.

42 in.

(1067 mm)

UD4 Uninsulated Duct

4 in. (102 mm) i.d.

42 in.

(1067 mm)

Bifold Glass Doors

DM1036, DM1042

4044-036 Air Kit Parts

Fastener Pack

Outside Air	2 Wire Ties	Outside Air
Hood	2 Wire Ties	Plate
		Assembly
	AK24
	Outside Air Kit

See your Heatilator dealer for a complete listing of optional components.

46	Heatilator • EL36/EL42 • 4044-132 • Rev V • 11/08

Page 46

Image 46

Hearth and Home Technologies EL42 Series, EL36 Series owner manual 1321 mm 406 mm, 1676 mm 508 mm 13 mm, Air Kit Parts

Contents

Hot screen/mesh and glass doors will cause burns Wood Burning FireplaceOperation Fire Risk Grate Listing Label Information/LocationNumber Installer Guide Table of ContentsUser Guide Warranty Hearth & Home Technologies Limited Warranty CONDITIONS, Exclusions & Limitation of Liability Heatilator EL36/EL42 4044-132 Rev V 11/08 Non-Combustible Materials Listing and Code ApprovalsAppliance Certiﬁcation Combustible Materials Your Fireplace Operating InstructionsHot glass will cause burns Grate Seasoned WoodStarting a Fire Firescreen Optional Components Glass DoorsVented Gas Log Sets & Gas Log Lighters Clear Space Wood Fuel Disposal of Ashes Maintainance and ServiceChimney Inspection/Cleaning Creosote Formation and Need for Removal Inspect Grate Glass CleaningCheck Firebox Refractory Frequency As desired Troubleshooting Guide Start Fire Problems Possible Cause Solution Installer Guide Getting Started Draft Design and Installation ConsiderationsNegative Pressure Locating Fireplace & Chimney Frequently open doors Central heat outlets or returns Fireplace System Requirements Tools and Supplies NeededInspect Fireplace and Components Framing & Clearances Mm all configurationsSelect Fireplace Location Clearances Clearances to Combustible Materials Sidewalls/Surrounds Fireplace Outside Model # Opening DimensionsFrame the Fireplace Position the Fireplace Installation of FireplaceThings to Consider Place Protective Metal Hearth Strips Ft min. from top of uppermost chimney section to air inlet YES Install Outside Air Kit Outside Air Installation Chimney Assembly Maintain minimum height of chimney above roof Chimney Requirements Height of Chimney Components Using Offsets/Returns Example Install Chimney Air Kit Assemble Chimney Sections Install Ceiling Firestops Installing the Ceiling Firestop Install Attic Insulation Shield Prepare Attic Insulation Shield Following steps should be skipped if using a chase Complete InstallationInstall Flashing Cut out Hole in Roof Chimney Termination Requirements Flat Roofs Gas line holes and other openings should be caulked with Chase InstallationsConstruct the Chase Chase should be constructed in the manner of all Install Chase Top Install Fireplace & ChimneyInstall as per Sections 7 Install Termination Cap ST375 Square Termination Cap TS345/TS345P Square Termination Cap TCT375 Terra Cotta Cap Field Constructed Shrouds ShroudsRadiation Shield Open Top Shroud TR342 caps require radiation shield Mailbox Style Shroud radiation shield required Roofed Style Shroud radiation shield required = 1/k x inches of thickness FinishingHearth Extension Refer to .2 for hearth extension insulation alternatives Raised Hearth Extension Framing Minimum between Non-combustible Sealant Noncombustible Finishing Materials Finishing Material In. Micore or equivilent insulation Combustible Mantel Clearances to Mantels or other Combustibles above Fireplace Outside Di- mensions Model Wood Burning Inserts AccessoriesGas Log/Lighter Provision Gas Code, Ansi Z223.1 Fireplace Dimensions Reference Materials ID4 Insulated Duct Mm i.d 1067 mm UD4 Uninsulated Duct 1321 mm 406 mm1676 mm 508 mm 13 mm Air Kit Parts Chimney Components Catalog # 305 mm 27-3/8 24-5/8 695 mm 625 mm Effective Outside Height Diameter 10-1/2 121 mm 267 mm10-1/2 267 mm 305 mm 24-5/8 625 mm 787 mm 10-7/8 276 mm Heatilator EL36/EL42 Service PartsRev V 11/08 EL42 Contact Information

Hearth and Home Technologies EL42 Series 1321 mm 406 mm, 1676 mm 508 mm 13 mm, Air Kit Parts

Models: EL42 Series EL36 Series

B. Optional Components

(1321 mm)

(406 mm)

(1676 mm)

(508 mm)

(13 mm)

ID4 Insulated Duct

4 in. (102 mm) i.d.

(1067 mm)

UD4 Uninsulated Duct

4044-036 Air Kit Parts

Heatilator • EL36/EL42 • 4044-132 • Rev V • 11/08