Fisher & Paykel OR61 Care and cleaning, Removing and refitting the oven door, To remove, To refit

28

Care and cleaning

Removing and refitting the oven door

To remove

1Open the door to the first stop position.

2Holding the handle firmly with both hands, lift the door up and away from the cooker to disengage the hinges.

Important!

Do not place your hands near the hinges while removing or replacing the door. The hinges are spring-loaded and could cause an injury when they snap back.

To refit

3Holding the handle firmly with both hands, slide the hinge arms into the slots.

4 Lift the door and push it from the bottom to engage the hinges. 5 Close the door firmly and check if it is properly in place.

Drop-down grill element

Important!

Before lowering the grill element, make sure that it has cooled down.

The grill element is held in place by a wire clip at its front. To release and lower the element, pull the wire clip down and swing it slightly towards you.

When you have finished cleaning the oven ceiling: raise the grill element all the way up, then swing the wire clip towards the back of the oven to hook the element into place. Make sure that the element is securely fixed.

The grill element itself will self-clean during use.

Wire clip