Pelco SX8205R manual Installation, Package Contents

Installation

PACKAGE CONTENTS

The following items are supplied:

1SX8205R module

1Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output

1Wall clip with two 4-40 x 0.250-inch Phillips pan head screws with lock washers (for attachment of single module to wall)

1SX8205R Unmanaged Ethernet Switch Installation manual (this manual)

SETTING 10BASE-T/100BASE-TX PORT MODES OF OPERATION

NOTE: As a matter of convenience, it is recommended that you verify the modes of operation for each 10BASE-T/100-BASE-TX port and then change the mode settings—if necessary—before mounting the SX8205R module into a rack or onto a wall.

The SX8205R module provides various configuration options that allow you to select the desired modes of operation for each 10BASE-T/100BASE-TX port (ports 1-5). You can select the desired modes of operation by means of a TX Mode switch that is provided on the bottom of the module for each port (refer to Figure 4).

TX MODE SWITCHES - PORTS 1-5

TX Mode

Figure 4. TX Mode Switches for 10BASE-T/100BASE-TX Ports 1-5

10 C2626M (2/07)