![1 Turn the power to the cooker off at the wall.](/images/new-backgrounds/67760/6776063x1.webp)
30
Care and cleaning
Replacing the fuse in the
The two
Important!
The power socket outlets on these cookers are rated at 250V 10A AC only.
If required, the fuse can be replaced by following these steps:
1 Turn the power to the cooker off at the wall.
WARNING!
Electrical Shock Hazard
Before accessing the fuse, ensure that the cooker has been disconnected from the power supply.
Failure to do so could result in death or electric shock.
2Unscrew the
the wall, so the back fuse cover on the
3 Remove the screw holding the fuse cover in place and remove the fuse cover.
4 Open the fuse housing, as shown, and remove the blown fuse cartridge.
5 Slide in the replacement fuse cartridge. Ensure that it is rated 16 A. (Two replacement fuse cartridges are supplied with the cooker.)
6 Close the fuse housing.
7Refit the fuse cover.
8Push the cooker back into position.
9 Refit the
10 Turn the power to the cooker back on at the wall and set the clock.
WARNING!
Tipping Hazard
All cookers can tip. Keep children away and take care. The
Failure to follow these instructions could result in injury.